MD0630T41A-2 is a IR type leakage current sensor which supports the detection of DC current 2~15mA, AC current 3~100mA. The alarming value can be set into 4mA-20mA, 6mA, 10mA or other values in the range. Not only type B detection mode but also the push-pull output can be used for leakage protection. This small RCD have the advantages as follows: cable (horizontal) installation, compact size,digital output,IR communication, standard compliant etc.
Product Features
AC-6mA DC-30mA Leakage Detection Protector
Smallest Size with Integrated Design, Cable Type
Digital Signal. Push-pull Output
IR Communication, Modbus Protocol
TUV-IEC62955-2018, CE-EMC, IS17017, UL2231, IEC62752
Standard: EN 61000-6-3:2007+A1, EN IEC 61000-6-1:2019
Product Parameters
Voltage Input | 12V±20% (Current about 12mA) |
Measurement Current Range | DC current:2~15mA; Max.AC current:3~100mA (Default threshold: DC 6mA, AC 30mA) |
Accuracy | DC±0,2mA,AC±0.3mA@25℃ |
Three-ways output | DC alarm, AC alarm, AC/DC alarm |
Function | Current value readable and settable |
Operation temperature | -25~+80℃ |
Appearance | |
Installation | Cable Installation |
Product Dimension
Product Application
Leakage sensors, in photovoltaic applications, are the process of converting alternating current to a standard form of direct current or alternating current and then delivering it to where it is needed. Among them, only when the current of the conversion system at all levels is normal, can the safety of the current transportation process be guaranteed. It can accurately measure the current of the key links of the system, detect and report abnormal conditions such as leakage in time, and avoid safety accidents.
MD0630T01A-R is an AC DC leakage detection RCD sensor with RJ12 Output for EVSE, Solar photovoltaic.
MD0630T01A-2 is an ultra-small size RCD/ AC-DC leakage sensor for Photovoltaic.