IM-NE801A has a 2 Form A (DPST-NO) contact arrangement in a PCB board mountable small case size. It features the 3mm contact gap and 4kV surge breakdown required by photovoltaic standard requirements. IM-NE801A contribute to overall energy savings with low coil holding voltage. IVY provide the necessary high switching capacity and low power consumption required by energy management applications.
IM-NE801A main features as follow:
Continuous Current: 40A; with Contact Form:2A; High Dielectric Strength 4000VAC; Low Temperature Rise;
Sealed Structure to Resist Harsh Environment; Contact gap: 3mm (@4kV overvoltage)
Mounting type: PCB mounted through hole
Number of operations: 50 000 cycles @32A, 230-250V
Contact resistance/load category: CC2
UL/TUV Certified, IEC61810-1 Compliant.
The relay has short-time overcurrent characteristics, can withstand three times of 1000A 1ms overcurrent, and the contacts will not be damaged, and can continue to work normally to open and close.
Short-time overcurrent (an overcurrent carrying capacity)
Product Parameters
Specification | Weight | ≈70g | |
Continuous Current | 40A | ||
Contact Form | 2A | ||
Contact Material | AgSnO2 | ||
Max. Switching Voltage | 277VAC | ||
Initial Contact Resistance | 10mΩ (at 20A) | ||
Insulation Resistance | 100MΩ,at 500VDC,50% RH | ||
Mechanical Endurance | 1*106ops | ||
Electrical Endurance | 5*104ops(@32A 230V) 2*104ops(@40A 230V) | ||
Dielectric withstanding voltage | Across Open Contact | 4000VAC 1min | |
Coil to Contact | 801A: 4000VAC 1min | ||
Pick-up & Release Time | 30ms. typical/10ms. typical | ||
Environment Temperature | Operation:-40℃~85℃ | ||
Storage:-40℃~125℃ | |||
Vibration | 10-40Hz,DA1.27mm, 40-70Hz:5g 70-100Hz:DA0.5mm,100-500Hz:5g | ||
Shock Resistance: | 20g, 11ms | ||
Dielectric Strength | 500Vrms, 1 min |
Product Dimension
Product Application
• Photovoltaic power generation systems (Solar inverter)
• Uninterruptible Power Supplies (UPS)
• Inverter
• Industrial equipment
• EV charging systems & EVSE design