Home / Products / EVolution / Type B EV RCD

MD0630T01A-R Digital Output 6mA DC 30mA AC RCD Protection Residual Current Monitoring for On-Board Charger

Charging of electric vehicles at a standard wall socket or a wall box requires protection devices against DC fault currents to avoid electric shock. Installed type A residual current circuit-breakers (RCCBs) are unable to identify and deactivate DC fault currents. IVY differential current sensors offer the opportunity to save the cost and space for a costly type B RCD in IC-CPD or wall boxes.

MD0630T01A-R RJ12 Output AC DC charging pile leakage sensor for electrical safety protection. With the features of high sensitivity, plastic casing, SIP package, integrated design, small size, digital signal, RJ12 push-pull output, accurate measurement and so on. This RJ12 RCD is widely used for EV charging. A residual current device (RCD) designed specifically for electric vehicles ... Each charger must be connected to a separate earth to prevent electric shocks.

Inquire Now Next Product

Product Details

Product Description

MD series residual current detection RCDs/RCMs are designed to detect even smallest residual currents. Together with evaluation units they are used for monitoring and protection of electrical circuits. for detection of residual currents in 1- / 3-phase AC systems

IEC standards residual current monitoring unit, its typical application is in a EV charger, for the detection of small both DC and AC residual current.
Type A (RCD) + 6ma dc residual current module combination for EV charger pile protection, all-in-one highly integrated digital output.
Applicable for the standard IEC 62955-2018 residual current requirements for RDC-PD.Applicable for GB/T 22794 and adapted to DC 6mA test.

MD0630T41A-1 is a AC leakage current sensor, DC leakage current sensor, dual usage residual current monitor with high sensitivity, mA level measurement, small size, integrated design, cable/horizontal installation. When the fault current reach the threshold, it can output the signal and cut off the circuit via a latching relay or break.

MD0630T01A-R Digital Output 6mA DC/30mA AC Leakage Sensor RCM Residual Current Monitor for Mode 2 EVSE

Product Features

Fault current detection according to TUV(IEC62955/IEC62752/IEC61851-1)

Default threshold for 6 mA DC and 30 mA AC (acc. to IEC Standard)

Total system cost significantly reduced compared to RCCB type B

Digital Signal (push-pull output) RJ12 Output

UART Communication with Modbus Protocol

Product Parameters

Voltage Input	12V±20% (Current about 12mA)
Measurement Current Range	DC current:2~15mA; AC current:3~100mA (Default threshold: DC 6mA, AC 30mA)
Accuracy	DC±0,2mA,AC±0.3mA@25℃
Three-ways output	DC alarm, AC alarm, AC/DC alarm
Function	Current value readable and settable
Operation temperature	-25~+80℃
Appearance	Plastic casing ,SIP encapsulation
Installation	6 Pins RJ12 Output

Product Dimension

Product Application

Leakage protection is important for personal and electrical device, however many people met challenges when they need a AC leakage sensor, DC leakage sensor, that;s the problem on cost, this integrate/combined AC DC leakage current sensor is one body RCD. On the other hand, some EV charger factory may use cable type, some adopt pin type, some need ultra-small type, hence IVY MD series can offer more 7 options on installation. No matter what's your design of PCBA, as long as your have needs on leakage protection, we can help you.