-
![IM601 TUV IEC62955 60A 250VAC Coil 12V SPST NO PCB Mount Magnetic Latching Relay for EV Charger]( "IM601 TUV IEC62955 60A 250VAC Coil 12V SPST NO PCB Mount Magnetic Latching Relay for EV Charger")
IM601 TUV IEC62955 60A 250VAC Coil 12V SPST NO PCB Mount Magnetic Latching Relay for EV Charger
IM601 is a 60a magnetic latching relay with single or dual coil. It has the characteristics of shock resistance, safety and high reliability, long life, low power consumption, strong load capacity, small size and better performance. Widely used in smart meter, ev charger, industrial control etc.
Inquire Now
-
![IM601 IEC62055-31 UC2 60A 250VAC 2 Coil 12VDC Single Pole Power Latch Relay for EV Charger]( "IM601 IEC62055-31 UC2 60A 250VAC 2 Coil 12VDC Single Pole Power Latch Relay for EV Charger")
IM601 IEC62055-31 UC2 60A 250VAC 2 Coil 12VDC Single Pole Power Latch Relay for EV Charger
IM601- It has the characteristics of shock resistance, safety and reliability, long life, low power consumption, strong load capacity, small size and better performance than general electromagnetic relays. In addition to the above advantages, it also uses single and double coils to work.The maximum switching current of IM601A can reach 60A.
Inquire Now
-
![IM601 60A 250VAC Dual Coil 12VDC SPST NO High Power PCB Latching Relay for Level 2 Charger]( "IM601 60A 250VAC Dual Coil 12VDC SPST NO High Power PCB Latching Relay for Level 2 Charger")
IM601 60A 250VAC Dual Coil 12VDC SPST NO High Power PCB Latching Relay for Level 2 Charger
Relays are used for safety cutoff purposes for the AC side power grid of a charging station. When an abnormal current is generated, it is important to securely cut the current so that it doesn't impact the charger or DC side power supply. IM601 60a relay is designed for ev charger.
Inquire Now
-
![MD0630T01A IEC62955 EV 30mA AC 6mA DC Leakage Protection Built-in Type B RCD Residual Current Sensor]( "MD0630T01A IEC62955 EV 30mA AC 6mA DC Leakage Protection Built-in Type B RCD Residual Current Sensor")
MD0630T01A IEC62955 EV 30mA AC 6mA DC Leakage Protection Built-in Type B RCD Residual Current Sensor
MD0630T01A is a residual current detection RCD sensor, When an electric shock or leakage fault occurs in the circuit, the secondary side of the transformer outputs a mA level current (DC 6mA, AC 30mA), so that the equipment on the connected secondary line will be protected (cut off the power supply, alarm signal, etc.)
Inquire Now
-
![5-1000V DC Meter 50 kW RS485 Modbus Bidirectional Shunt Connect]( "5-1000V DC Meter 50 kW RS485 Modbus Bidirectional Shunt Connect")
5-1000V DC Meter 50 kW RS485 Modbus Bidirectional Shunt Connect
The DC energy meter series included EM613001,EM613002,EM613005,EM619001.... they are mainly designed for telecommunication base stations, DC charging piles, and applications.
Inquire Now
-
![EM613001 200A 40-400V Din Rail Smart Shunt RS485 DC Power Monitoring EV Charger Smart Meter]( "EM613001 200A 40-400V Din Rail Smart Shunt RS485 DC Power Monitoring EV Charger Smart Meter")
EM613001 200A 40-400V Din Rail Smart Shunt RS485 DC Power Monitoring EV Charger Smart Meter
The EM613001 din rail type DC energy meter is mainly designed for Telecom base stations, DC charging station, and solar PV applications etc. The dc meter can measure of important DC parameters: Voltage, current, power and energy etc. It also support bi-directional measurement. All data in the meter are accessible via RS485 using Modbus RTU/DLT645.
Inquire Now
-
![IM-SP401A 32A 35A 250V 12VDC Coil SPST-NO Single Pole Non Latching PCB Relay for Mode 3 Charging]( "IM-SP401A 32A 35A 250V 12VDC Coil SPST-NO Single Pole Non Latching PCB Relay for Mode 3 Charging")
IM-SP401A 32A 35A 250V 12VDC Coil SPST-NO Single Pole Non Latching PCB Relay for Mode 3 Charging
IM-SP401A is a continuous current 40A 1 pole spst-no ev power relay, the high dielectric strength is 4000VAC 1min under the condition of low temperature rise, and the sealed structure can withstand harsh environments.
Inquire Now
-
![IM-NE801A IEC61810-1 EV Charger Disconnect Breaker 40A 230VAC 12V Coil DPST-NO PCB 2 Pole Power Relay]( "IM-NE801A IEC61810-1 EV Charger Disconnect Breaker 40A 230VAC 12V Coil DPST-NO PCB 2 Pole Power Relay")
IM-NE801A IEC61810-1 EV Charger Disconnect Breaker 40A 230VAC 12V Coil DPST-NO PCB 2 Pole Power Relay
IM-NE801A is a continuous current 40A 2 poles high power relay, the high dielectric strength is 4000VAC 1min under the condition of low temperature rise, and the sealed structure can withstand harsh environments.
Inquire Now
-
![EM519032 MID Approved Electric Car Charging 3 Phase Smart Bidirectional Energy Meter with RS485 Modbus]( "EM519032 MID Approved Electric Car Charging 3 Phase Smart Bidirectional Energy Meter with RS485 Modbus")
EM519032 MID Approved Electric Car Charging 3 Phase Smart Bidirectional Energy Meter with RS485 Modbus
EM519032 is a 80A three-phase four-wire din rail mounted kwh meter. This EV meter adopts DIN rail installation, and has bidirectional measurement function (active forward and reserved measurement). This AC ev charging meter can also visually display the voltage, current, power, voltage, current, It is convenient to query all kinds of data and view
Inquire Now
-
![IM-NE801A UL/IEC61810-1 EV Relays 40A 12VDC DPST-NO 2 Pole Monostable Power Relay for Mode 3 Charger]( "IM-NE801A UL/IEC61810-1 EV Relays 40A 12VDC DPST-NO 2 Pole Monostable Power Relay for Mode 3 Charger")
IM-NE801A UL/IEC61810-1 EV Relays 40A 12VDC DPST-NO 2 Pole Monostable Power Relay for Mode 3 Charger
IM-NE801A is a continuous current 40A 2 poles ev power relay, the high dielectric strength is 4000VAC 1min under the condition of low temperature rise, and the sealed structure can withstand harsh environments.
Inquire Now
-
![IM-NE802 100A 250VAC Coil 12VDC 3mm Contact Gap SPST Non-latching Power Relay for EV AC Charger]( "IM-NE802 100A 250VAC Coil 12VDC 3mm Contact Gap SPST Non-latching Power Relay for EV AC Charger")
IM-NE802 100A 250VAC Coil 12VDC 3mm Contact Gap SPST Non-latching Power Relay for EV AC Charger
IM-NE802 is a EV Relay for AC Charging with max amperage of 63A/100A. The contact form is SPST type (single pole single throw) 1A (normally open) contacts. With the 3mm contact distances, the dielectric strength can reach 4000VAC. It also meet with IEC255 & GB8898 Standard with UL certified.
Inquire Now
-
![EM519032 MID approved Modbus AC energy meters for every EV Charging]( "EM519032 MID approved Modbus AC energy meters for every EV Charging")
EM519032 MID approved Modbus AC energy meters for every EV Charging
EM519032 is a 80A three-phase four-wire din rail mounted kwh meter. This EV meter adopts DIN rail installation, and has bidirectional measurement function (active forward and reserved measurement). This AC ev charging meter can also visually display the voltage, current, power, voltage, current, It is convenient to query all kinds of data and view
Inquire Now
