-
MD0630T41A-2 High Sensitivity 4mA DC 20mA AC Residual Current Detetion RCD Leakage Current Transformer
MD0630T41A-2 is an ac dc leakage current sensor designed to detect even smallest residual currents(4mA DC; 20mA AC), which has the characteristics of accurate measurement, high sensitivity, digital signal, push-pull output, integrated design, and small size.
Inquire Now
-
MD0630T41A-1 EV Charging Protection RCMU Cable Type 30mA AC 6mA DC Residual Current Detection RCD Sensor
MD0630T41A-1 is an AC DC leakage current sensor, dual usage residual current monitor with high sensitivity, mA level measurement, small size, integrated design, cable/horizontal installation. When the fault current reach the threshold, it can output the signal and cut off the circuit via a latching relay or break.
Inquire Now
-
IVY-CT-PCB-01-10A PCB Mounted Current Transformer for EV Charger
IVY-CT-PCB-01-10A is a pcb mounted current transformer, the max current is 10A and the max current can also be made into 50A and 60A. The advantages of this PCB ct are: small size, high accuracy of 0.1 class, good consistency, 3000V dielectric strength, low phase error etc. They are mainly used for current and power sampling and measurement.
Inquire Now
-
MD0630T41A IEC62752 Mode 3 RCM 6mA DC 30mA AC Leakage Protection Residual Current Monitoring Device
MD0630T41A is a DC/AC leakage current sensor with high sensitivity, accurate measurement, small size, integration, digital output, UART communication, Modbus protocol, etc. The measurement DC current range is 2~15mA, the AC current range is 3~100mA, Type B detection is worth to be mentioned too.
Inquire Now
-
AC12-450T15DA Three Phase Input 220V to 15V 1A 5W Dual Output AC DC Converter Power Supply Module
The AX series is a small-sized, high-efficiency modular power supply for customers. The switching frequency is 60KHz, the board is installed on PCB, and the flame-retardant material can play a good safety isolation.
Inquire Now
-
EM613002 Shunt Sampling 100A RS485 DC Energy Monitor DC Electricity Meter for Smart EV Fast Charge Billing
The EM613002 is a shunt based sampling DC measurement meter device. Support RS485 & NB-IOT communication, upload data to the system platform through RS485, play the role of a concentrator.
Inquire Now
-
D129072 Over Current Alarm 100A Outdoor M-bus Split Core Current Transformer Sensor for EV Charger
D129072 is a 200mA to 100A wireless M-bus smart current transformer which is the best choice of outdoor electricity measurement.
Inquire Now
-
IM-M1002 Anti-magnetic 500mT 80A 250VDC 12 Volt Single Pole Miniature Motor Latching Relay for EV
IM-M1002 is a motor holding relay with a switching current of 80A, with a compact design size of 26.5*23.5*15mm, contact arrangement 1A/1B, contact material AgSnO2
Inquire Now