-
IM-NE802 100A 250VAC Coil 12VDC 3mm Contact Gap SPST Non-latching Power Relay for EV AC Charger
IM-NE802 is a EV Relay for AC Charging with max amperage of 63A/100A. The contact form is SPST type (single pole single throw) 1A (normally open) contacts. With the 3mm contact distances, the dielectric strength can reach 4000VAC. It also meet with IEC255 & GB8898 Standard with UL certified.
Inquire Now
-
EM519033 80A 230/400V 3 Phase Smart MID Modbus EV Meter for Charging Pile Energy Management
EM519033 is a 80A three-phase four-wire electric energy meter. This ev meter adopts IR & RS485 communication, DIN rail installation, and has bidirectional measurement function (active forward and reserved measurement).
Inquire Now
-
IM901 IEC61851-1 90A 230VAC Dual Coil 12VDC SPDT Bistable Power Latch Relay for 63A EV Charger
Its rated load can reach 90A 250VAC, and the contact material is AgSnO2. The maximum switching current and power supply can reach 90A, 22500VA. In addition to the above characteristics, the electrical and mechanical life can reach 10,000 cycles and 100,000 cycles.
Inquire Now
-
EM118091 PTB EV Energy Metering Bidirectional Meter MID energy meter Analyzer
EM118091 is a 100A bidirectional meter for utility or EV charging users. It supports reading the active energy, reactive energy, forward energy, reverse energy.It supports RS-485 Modbus and DLT645 communication, as well as LCD scrolling display, which can be in solar system. It also suits for indoor usage and 50Hz or 60Hz power grid. The Physikalis
Inquire Now
-
EM118090 Single-phase two-wire EV Charging AC Energy Meter Eichrecht Certification
EM118090 is a 230V, 100A single-phase two-wire multi-function RS485 Modbus meter. It adopts rail rail-type installation method, the size is only 18mm wide, supports RS485 communication, the frequency is 50Hz/60Hz, and the starting current of 0.004Ib.
Inquire Now
-
IM-NE801A IEC62955 Withstand Voltage 4kV 32A 40A 250V 2A Contact PCB Mount EV AC Charger Relay
IM-NE801A is a continuous current 40A new energy power relay, the high dielectric strength is 4000VAC 1min under the condition of low temperature rise, and the sealed structure can withstand harsh environments.
Inquire Now
-
MD0630T01A EVCS RCMU 6mA DC Protection Differential Current Monitoring Module for AC Charging Station
MD0630T01A is a residual current detection RCD sensor, When an electric shock or leakage fault occurs in the circuit, the secondary side of the transformer outputs a mA level current (DC 6mA, AC 30mA), so that the equipment on the connected secondary line will be protected (cut off the power supply, alarm signal, etc.)
Inquire Now
-
MD0630T01A EVSE GFCI PCB Mount RCD CT 30mA AC 6mA DC RCMU Residual Current Monitoring Unit
MD0630T01A is a residual current detection RCD sensor, When an electric shock or leakage fault occurs in the circuit, the secondary side of the transformer outputs a mA level current (DC 6mA, AC 30mA), so that the equipment on the connected secondary line will be protected (cut off the power supply, alarm signal, etc.)
Inquire Now
-
MD0630T01A EVSE PCB Mount GFCI CT AC DC RCD Earth Leakage Current Detector with Uart Modbus
MD0630T01A is a residual current detection RCD sensor, When an electric shock or leakage fault occurs in the circuit, the secondary side of the transformer outputs a mA level current (DC 6mA, AC 30mA), so that the equipment on the connected secondary line will be protected (cut off the power supply, alarm signal, etc.)
Inquire Now
-
EM118089 MID Energy Counter EV Meter for Charging Pile Energy Management System Solution
EM118089 is a 63A 100A single-phase rail-mounted instrument, and a multi-functional power monitoring instrument.
Inquire Now
-
MD0630T01A EV Charger Testing RCD Transformer 6mA DC 30mA AC Earth Leakage Current Detection Device
MD0630T01A is a residual current detection RCD sensor, When an electric shock or leakage fault occurs in the circuit, the secondary side of the transformer outputs a mA level current (DC 6mA, AC 30mA), so that the equipment on the connected secondary line will be protected (cut off the power supply, alarm signal, etc.)
Inquire Now
-
Cheap Price Type B RCD Residual Current Sensor for India Market
The MD0630STA-PM is a high-sensitivity, compact AC/DC leakage current sensor. It accurately detects DC leakage currents of 3-6mA or AC leakage currents of 15-30mA and outputs an alarm signal. It also features a self-test function to ensure proper operation.
Inquire Now