-
![IM-SP401A 32A 40A 277VAC 12V Single Pole Non Latching SPST-NO Miniature Power Relay for Solar Application]( "IM-SP401A 32A 40A 277VAC 12V Single Pole Non Latching SPST-NO Miniature Power Relay for Solar Application")
IM-SP401A 32A 40A 277VAC 12V Single Pole Non Latching SPST-NO Miniature Power Relay for Solar Application
IM-SP401A is a single pole normally open small high capacity 40A PCB Circuit Board Relay, compared Similar relays in the market,It has low temperature rise, low consumption, 1000A 10ms/three times short-time over-current, and competitive price advantage. Widely used in EV charger and solar panel.
Inquire Now
-
![IM-SP401A 32A 35A 250V 12VDC Coil SPST-NO Single Pole Non Latching PCB Relay for Mode 3 Charging]( "IM-SP401A 32A 35A 250V 12VDC Coil SPST-NO Single Pole Non Latching PCB Relay for Mode 3 Charging")
IM-SP401A 32A 35A 250V 12VDC Coil SPST-NO Single Pole Non Latching PCB Relay for Mode 3 Charging
IM-SP401A is a continuous current 40A 1 pole spst-no ev power relay, the high dielectric strength is 4000VAC 1min under the condition of low temperature rise, and the sealed structure can withstand harsh environments.
Inquire Now
-
![EM619002 PTB MID Eichrecht Certified 250A Bidirectional DC 1000V Energy Meter for EV Charger]( "EM619002 PTB MID Eichrecht Certified 250A Bidirectional DC 1000V Energy Meter for EV Charger")
EM619002 PTB MID Eichrecht Certified 250A Bidirectional DC 1000V Energy Meter for EV Charger
EM619002 Class B dc energy meter with bidirectional measurement, designed for telecommunications base stations, DC charging piles, solar photovoltaic, and other applications, this meter can measure the voltage, current, power and forward and reverse energy and so on in the DC system.
Inquire Now
-
![EM519033 MID Approval Solar Net Metering Gross Meter Bidirectional Modbus 3 Phase Smart PV Meter]( "EM519033 MID Approval Solar Net Metering Gross Meter Bidirectional Modbus 3 Phase Smart PV Meter")
EM519033 MID Approval Solar Net Metering Gross Meter Bidirectional Modbus 3 Phase Smart PV Meter
EM519033 is a MID approved three phase din rail meter with IR & RS485 communication. With the accuracy class B, this meter can measure active&reactive, forward & reverse energy and support 3 modes of measurements. This MID energy meter can also visually display the voltage, current, power etc.
Inquire Now
-
![MD0630STA-P PCB Mount Type B AC DC Current Sensor Earth Leakage Detection RCD for Fault Protection]( "MD0630STA-P PCB Mount Type B AC DC Current Sensor Earth Leakage Detection RCD for Fault Protection")
MD0630STA-P PCB Mount Type B AC DC Current Sensor Earth Leakage Detection RCD for Fault Protection
MD0630STA-P is an AC DC leakage protection residual current sensor (also named as RCM/RCD) with digital output of fault detection and integrated self-testing functions. The sensor can be used to build a IEC62955 Residual Direct Current – Detecting Device (RDC-DD) together with EV charging controller and protection devices inside EV chargers.
Inquire Now
-
![MD0630STA-P Integration Type B RCD 30mA AC 6mA DC Differential Protection RCM Module for EV Charger]( "MD0630STA-P Integration Type B RCD 30mA AC 6mA DC Differential Protection RCM Module for EV Charger")
MD0630STA-P Integration Type B RCD 30mA AC 6mA DC Differential Protection RCM Module for EV Charger
MD0630STA-P is a AC DC leakage protection residual current sensor (also named as RCM/RCD) with digital output of fault detection and integrated self-testing functions. The sensor can be used to build a IEC62955 Residual Direct Current – Detecting Device (RDC-DD) together with EV charging controller and protection devices inside EV chargers.
Inquire Now
-
![MD36DA-P EV Charger RDC-DD 6mA DC Leakage Protection Residual Direct Current Detection Device]( "MD36DA-P EV Charger RDC-DD 6mA DC Leakage Protection Residual Direct Current Detection Device")
MD36DA-P EV Charger RDC-DD 6mA DC Leakage Protection Residual Direct Current Detection Device
MD36DA-P is a DC leakage current sensor with the characteristics of high sensitivity, accurate measurement, small size, and integration. When a DC leakage current of 3~6mA is detected, an alarm signal is output. It has a self-test function, which can be used to judge whether the sensor is in a normal working state in real time.
Inquire Now
-
![IM-NE801A IEC61810-1 EV Charger Disconnect Breaker 40A 230VAC 12V Coil DPST-NO PCB 2 Pole Power Relay]( "IM-NE801A IEC61810-1 EV Charger Disconnect Breaker 40A 230VAC 12V Coil DPST-NO PCB 2 Pole Power Relay")
IM-NE801A IEC61810-1 EV Charger Disconnect Breaker 40A 230VAC 12V Coil DPST-NO PCB 2 Pole Power Relay
IM-NE801A is a continuous current 40A 2 poles high power relay, the high dielectric strength is 4000VAC 1min under the condition of low temperature rise, and the sealed structure can withstand harsh environments.
Inquire Now
-
![MD0630STA-C Low-cost RCM Sensor EV Charger RCD Protection with 6mA DC 30mA AC Leakage Detection]( "MD0630STA-C Low-cost RCM Sensor EV Charger RCD Protection with 6mA DC 30mA AC Leakage Detection")
MD0630STA-C Low-cost RCM Sensor EV Charger RCD Protection with 6mA DC 30mA AC Leakage Detection
MD0630STA-C is an AC DC leakage current sensor with the characteristics of high sensitivity, accurate measurement, small size, and integration. When a DC leakage current of 3~6mA or an AC leakage current of 15~30mA is detected, an alarm signal will be output. At the same time, it has a self-test function.
Inquire Now
-
![MD0630STA-C EV Charger B Type RCD Protection 30mA AC 6mA DC Leakage Sensor Residual Current Monitoring]( "MD0630STA-C EV Charger B Type RCD Protection 30mA AC 6mA DC Leakage Sensor Residual Current Monitoring")
MD0630STA-C EV Charger B Type RCD Protection 30mA AC 6mA DC Leakage Sensor Residual Current Monitoring
MD0630STA-C is an AC DC leakage current sensor with the characteristics of high sensitivity, accurate measurement, small size, and integration. When a DC leakage current of 3~6mA or an AC leakage current of 15~30mA is detected, an alarm signal will be output. At the same time, it has a self-test function.
Inquire Now
-
![MD36DA-P Low Price RDC-DD 6mA DC Differential Monitoring Module Zero Sequence Current Transformer]( "MD36DA-P Low Price RDC-DD 6mA DC Differential Monitoring Module Zero Sequence Current Transformer")
MD36DA-P Low Price RDC-DD 6mA DC Differential Monitoring Module Zero Sequence Current Transformer
MD36DA-P is a DC leakage current sensor with the characteristics of high sensitivity, accurate measurement, small size, and integration. When a DC leakage current of 3~6mA is detected, an alarm signal is output. It has a self-test function, which can be used to judge whether the sensor is in a normal working state in real time.
Inquire Now
-
![MD0630STA-C KC/CE/EN61851-1 30mA AC 6mA DC Leakage Alarm RCD Residual Current Detection for EVSE Project]( "MD0630STA-C KC/CE/EN61851-1 30mA AC 6mA DC Leakage Alarm RCD Residual Current Detection for EVSE Project")
MD0630STA-C KC/CE/EN61851-1 30mA AC 6mA DC Leakage Alarm RCD Residual Current Detection for EVSE Project
MD0630STA-C is an AC DC leakage current sensor with the characteristics of high sensitivity, accurate measurement, small size, and integration. When a DC leakage current of 3~6mA or an AC leakage current of 15~30mA is detected, an alarm signal will be output. At the same time, it has a self-test function.
Inquire Now
