-
MD0630T01A-2 Small Pin Type RCMU Protection 6mA DC Earth Leakage Current Detector for 22KW AC Charger
MD0630T01A-2 is an ultra-miniature AC DC leakage sensor for AC portable ev charger, which has the characteristics of accurate measurement, high sensitivity, digital signal, push-pull output, and integrated design, measuring current range DC current: 2~15mA; Maximum AC current: 3~100mA (default threshold: DC 6mA, AC 30mA)
Inquire Now
-
EM619001 150A 1000V MID Din Rail Data Logger Bidirectional DC Power Meter for DC Charging Station
EM619001 dc energy meter is designed for measuring and monitoring in DC systems, especially for the DC EV chargers. The din rail DC energy meters can measure of important DC parameters: voltage, current, power and energy etc. It also support bi-directional measurement with pulse output. All data in the meter are accessible via RS485 using Modbus.
Inquire Now
-
MD0630T41A Integrated 6mA DC RCD Protection Leakage Sensor Differential Current Transformer for AC Charger
MD0630T41A is a DC/AC leakage current sensor with high sensitivity, accurate measurement, small size, integration, digital output, UART communication, Modbus protocol, etc. The measurement DC current range is 2~15mA, the AC current range is 3~100mA, Type B detection is worth to be mentioned too.
Inquire Now
-
IM901 IEC61851-1 90A 230VAC Dual Coil 12VDC SPDT Bistable Power Latch Relay for 63A EV Charger
Its rated load can reach 90A 250VAC, and the contact material is AgSnO2. The maximum switching current and power supply can reach 90A, 22500VA. In addition to the above characteristics, the electrical and mechanical life can reach 10,000 cycles and 100,000 cycles.
Inquire Now
-
IM601 TUV IEC62955 60A 250VAC Coil 12V SPST NO PCB Mount Magnetic Latching Relay for EV Charger
IM601 is a 60a magnetic latching relay with single or dual coil. It has the characteristics of shock resistance, safety and high reliability, long life, low power consumption, strong load capacity, small size and better performance. Widely used in smart meter, ev charger, industrial control etc.
Inquire Now
-
IM-NE801A UL/IEC61810-1 EV Relays 40A 12VDC DPST-NO 2 Pole Monostable Power Relay for Mode 3 Charger
IM-NE801A is a continuous current 40A 2 poles ev power relay, the high dielectric strength is 4000VAC 1min under the condition of low temperature rise, and the sealed structure can withstand harsh environments.
Inquire Now
-
IVY-CT-PCB-01-10A High Precision Single Phase 50/60Hz 220V AC 40A 60A PCB Mount CT Current Transformer
IVY-CT-PCB-01-10A is a pcb mounted current transformer, the max current can also be made into 50A and 60A. The advantages of this PCB ct are: small size, high accuracy of 0.1 class, good consistency, 3000V dielectric strength, low phase error etc. They are mainly used for current and power sampling and measurement.
Inquire Now
-
IM601 IEC62055-31 UC2 60A 250VAC 2 Coil 12VDC Single Pole Power Latch Relay for EV Charger
IM601- It has the characteristics of shock resistance, safety and reliability, long life, low power consumption, strong load capacity, small size and better performance than general electromagnetic relays. In addition to the above advantages, it also uses single and double coils to work.The maximum switching current of IM601A can reach 60A.
Inquire Now
-
MD0630T01A EV Charger Testing RCD Transformer 6mA DC 30mA AC Earth Leakage Current Detection Device
MD0630T01A is a residual current detection RCD sensor, When an electric shock or leakage fault occurs in the circuit, the secondary side of the transformer outputs a mA level current (DC 6mA, AC 30mA), so that the equipment on the connected secondary line will be protected (cut off the power supply, alarm signal, etc.)
Inquire Now
-
IM-NE802 100A 250VAC Coil 12VDC 3mm Contact Gap SPST Non-latching Power Relay for EV AC Charger
IM-NE802 is a EV Relay for AC Charging with max amperage of 63A/100A. The contact form is SPST type (single pole single throw) 1A (normally open) contacts. With the 3mm contact distances, the dielectric strength can reach 4000VAC. It also meet with IEC255 & GB8898 Standard with UL certified.
Inquire Now
-
MD0630T01A IEC62955 AC DC Leakage Detector Internal Type B EV RCD 6mA 30mA Residual Current Device
MD0630T01A is a residual current detection RCD sensor, When an electric shock or leakage fault occurs in the circuit, the secondary side of the transformer outputs a mA level current (DC 6mA, AC 30mA), so that the equipment on the connected secondary line will be protected (cut off the power supply, alarm signal, etc.)
Inquire Now
-
EM519033-04 MID Certified 3 Phase Din Rail Net Metering Solar Bidirectional Meter with RS485 Modbus
EM519033-04 AC energy meters is designed for measuring and monitoring in AC side of solar panels. This solar energy meter can measure all important electrical parameters: voltage, current, power and energy, etc. It also supports bi-directional measurement with pulse output. All data in the meter are accessible via RS485 using Modbus RTU protocol.
Inquire Now