-
IM-M1001D 100A 250VAC 12V Magnet Immunity 500mt Miniature 2 Pole Solar Latching Relay
IM-M1001D is a latching relay with a maximum switching current of 100A, with a compact design size of 29*24.5*27.1mm, a contact method of 2A/2B, and a permanent magnetic resistance of 500mT. It has low temperature rise, low consumption and competitive price advantage.
Inquire Now
-
IM-M1002 80A 230VAC Single Pole Motor Electrical Latching Relay for Solar Panel Disconnect
IM-M1002 is a latching relay with a maximum switching current of 80A, with a compact design size of 26.5*23.5*15mm, a contact method of 1A/B, and a permanent magnetic resistance of 500mT. It has low temperature rise, low consumption and competitive price advantage.
Inquire Now
-
IM-M1001 Anti-magnetic 500mT 80A 250VAC 9VDC Volt Single Pole Miniature Motor Latching Solar Relay
IM-M1001 is a latching relay with a maximum switching current of 80A, with a compact design size of 26.5*23.5*15mm, a contact method of 1A/B, and a permanent magnetic resistance of 500mT. It has low temperature rise, low consumption, 1000A 10ms/three times short-time over-current, and competitive price advantage.
Inquire Now
-
IM-SP401A 32A 40A 277VAC 12V Single Pole Non Latching SPST-NO Miniature Power Relay for Solar Application
IM-SP401A is a single pole normally open small high capacity 40A PCB Circuit Board Relay, compared Similar relays in the market,It has low temperature rise, low consumption, 1000A 10ms/three times short-time over-current, and competitive price advantage. Widely used in EV charger and solar panel.
Inquire Now
-
EM519033 MID Approval Solar Net Metering Gross Meter Bidirectional Modbus 3 Phase Smart PV Meter
EM519033 is a MID approved three phase din rail meter with IR & RS485 communication. With the accuracy class B, this meter can measure active&reactive, forward & reverse energy and support 3 modes of measurements. This MID energy meter can also visually display the voltage, current, power etc.
Inquire Now
-
MD0630STA-P Insulation Monitor Type B AC DC Current Sensor Earth Leakage Detection RCD for Fault Protection
MD0630STA-P is an AC DC leakage protection residual current sensor (also named as RCM/RCD) with digital output of fault detection and integrated self-testing functions. The sensor can be used to build a IEC62955 Residual Direct Current – Detecting Device (RDC-DD) together with EV charging controller and protection devices inside EV chargers.
Inquire Now
-
MD0630T01A-Z Differential Current Sensor 6mA dc/30mA ac rms PCB Mount RCD
Inquire Now
-
EM613002 Din Rail Mount 100A Solar Smart Shunt RS485 Wifi DC Energy Meter for Telecom Tower
The EM613002 is a shunt sampling DC measurement device. Support RS485 & NB-IOT communication, upload data to the system platform through RS485, play the role of a concentrator.
Inquire Now
-
EM619001 200A 600VDC Din Rail RS485 Modbus Net Metering DC Smart PV Solar Bidirectional Meter
EM619001 DC energy meters are designed for measuring and monitoring in DC systems, especially for the DC EV chargers. The din rail DC energy meters can measure of important DC parameters: voltage, current, power and energy etc. It also support bi-directional measurement with pulse output. All data in the meter are accessible via RS485 using Modbus.
Inquire Now
-
EM613005 9-60VDC Powered Solar Bidirectional RS485 DC Volt Amp Watt meter for 48VDC Battey System
EM613005 is a 1 channel direct current DC smart energy meter designed with advanced energy metering chip and SMT technology. With RS485 port, the meter can communicate with the computer to exchange the data. The meter is widely used for monitoring and controlling energy flow in DC systems such as solar PV energy, wind turbine power...
Inquire Now
-
EM613001 Multi-tariff Din Rail 200A PV 40-400VDC Digital RS485 DC Solar Power Meter with Shunt
EM613001 is a DC measuring device sampling by shunt. Support RS485 communication and upload data to the system platform through the communication between RS485 and concentrator ( PS: EM613002 - it’s NB concentrator which allows 25 pcs of RS485 DC meters).
Inquire Now
-
EM619001 Din Rail 5-1000VDC 75mV Shunt RS485 Modbus Bidirectional DC Smart Energy Meter for Solar System
EM619001,Which is a very useful product in computing the power generated through Solar Power System.This DC ENERGY METER shall read the energy produced through Solar Array, which is vital to arrive the efficiency as well as to calculate & ascertain the payback period of the system.The DC energy meter is capable of read DC voltage, DC current, KW,
Inquire Now