-
MD0630T41A-1 EV Charging Protection RCMU Cable Type 30mA AC 6mA DC Residual Current Detection RCD Sensor
MD0630T41A-1 is an AC DC leakage current sensor, dual usage residual current monitor with high sensitivity, mA level measurement, small size, integrated design, cable/horizontal installation. When the fault current reach the threshold, it can output the signal and cut off the circuit via a latching relay or break.
Inquire Now
-
MD0630T41A-1 AEC-Q200 UL1741 AC DC RCM Residual Current Earth Leakage Detector for Hybrid PV Inverter
MD0630T41A-1 is a high-sensitivity AC and DC leakage current sensor. When the leakage current reach the settable value then there will be 3 types of alarming,
Inquire Now
-
EM118090 MID Approved Single Phase Din Rail RS485 Energy Monitor Two Way Electric Meter for Solar
EM118090 is a single-phase din rail type new energy AC energy meter.The size is only 18mm wide, supports RS485 communication, the frequency is 50Hz/60Hz, and uses 0.004Ib starting current, LCD 5+2 display, using two-way measurement, IP51 indoor protection.
Inquire Now
-
EM118090 Single-phase two-wire EV Charging AC Energy Meter Eichrecht Certification
EM118090 is a 230V, 100A single-phase two-wire multi-function RS485 Modbus meter. It adopts rail type installation method, the size is only 18mm wide, supports RS485 communication, the frequency is 50Hz/60Hz, and the starting current of 0.004Ib.
Inquire Now
-
EM118089 230V 100A single-phase Dinrail Net Gross Bi-directional Metering Solar Energy Meter
EM118089 is a 100A 230V single-phase rail type multi-function power monitoring instrument. It supports SO output, two-way measurement, only 18mm wide, 1000imp/kWh pulse constant, 50Hz/60Hz frequency, and the accuracy level can reach class B. And in line with MID certificate and DIN EN 50022 standard, it can be widely used in photovoltaic ...
Inquire Now
-
EM118089 MID Certified EV Car 1 Phase 230V 40A Bidirectional Power Meter with RS485 Modbus
EM118089 (MID certified) are intended for energy measurements in single-phase electrical power network and can be used in residential, industrial, utility and EV-charging. It is a single phase DIN Rail energy meter. It is only 18mm width, but can support RS485 communication and comply with DIN EN 50022 standard.
Inquire Now
-
MD0630T41A 30mA RCD Sensor 6mA DC Earth Leakage Detection RCM for Solar Strings and Battery Pack
MD0630T41A is a AC DC integrated leakage current sensor with high sensitivity, accurate measurement, small size, UART communication, Modbus protocol, etc.
Inquire Now
-
IVY-CT-PCB-01-10A PCB Mounted Current Transformer for EV Charger
IVY-CT-PCB-01-10A is a pcb mounted current transformer, the max current is 10A and the max current can also be made into 50A and 60A. The advantages of this PCB ct are: small size, high accuracy of 0.1 class, good consistency, 3000V dielectric strength, low phase error etc. They are mainly used for current and power sampling and measurement.
Inquire Now
-
MD0630T41A IEC62752 Mode 3 RCM 6mA DC 30mA AC Leakage Protection Residual Current Monitoring Device
MD0630T41A is a DC/AC leakage current sensor with high sensitivity, accurate measurement, small size, integration, digital output, UART communication, Modbus protocol, etc. The measurement DC current range is 2~15mA, the AC current range is 3~100mA, Type B detection is worth to be mentioned too.
Inquire Now
-
EM519033 Three Phase Bi-Directional Reverse Meter for Solar Net Metering
EM519033 series AC energy meters is designed for measuring and monitoring in AC side of solar panels.
Inquire Now
-
EM519033 80A 230/400V 3 Phase Smart MID Modbus EV Meter for Charging Pile Energy Management
EM519033 is a 80A three-phase four-wire electric energy meter. This ev meter adopts IR & RS485 communication, DIN rail installation, and has bidirectional measurement function (active forward and reserved measurement).
Inquire Now
-
EM118019-02 MID Approval Single Phase On Grid Solar Energy Meter Bidirectional PV Smart Meter
EM118019-02 is a class B single-phase two-wire digital energy meter. It adopts RS485 communication, DIN rail type instrument installation, has bidirectional measurement function (active forward and reverse measurement) and complies with EN50470-1/3 standard. What’s more this PV solar meter are MID approved.
Inquire Now