-
EM118090 Bi-directional Single phase AC EV electrical vehicle charger charging station energy meter
EM118090 AC energy meters is designed for measuring and monitoring in AC side. The meters can measure all important AC parameters: voltage, current, power and energy, etc. It also supports bi-directional measurement with pulse output. All data in the meter are accessible via RS485 using Modbus.
Inquire Now
-
AC-DC Single Output Three Outputs AC/DC Converters Power Supply Module
AX series-AC DC Converters offer fully protected single outputs/ dual outputs and EMI compliance without the need for any external components.
Inquire Now
-
AC12-450T15DA Three Phase Input 220V to 15V 1A 5W Dual Output AC DC Converter Power Supply Module
The AX series is a small-sized, high-efficiency modular power supply for customers. The switching frequency is 60KHz, the board is installed on PCB, and the flame-retardant material can play a good safety isolation.
Inquire Now
-
EM613002 LCD Bi-directional 5-1000V DC Voltage Input DC Solar Power Watt Energy Meter for PV Monitoring
The EM613002 is a shunt sampling DC measurement device. Support RS485 & NB-IOT communication, upload data to the system platform through RS485, play the role of a concentrator.
Inquire Now
-
EM613002 Shunt Sampling 100A RS485 DC Energy Monitor DC Electricity Meter for Smart EV Fast Charge Billing
The EM613002 is a shunt based sampling DC measurement meter device. Support RS485 & NB-IOT communication, upload data to the system platform through RS485, play the role of a concentrator.
Inquire Now
-
EM613001 10-240A Multifunction Data Logger Solar PV DC 40-400V Power Watt Energy Meter with Shunt
EM613001 is a DC measuring device sampling by shunt. Support RS485 communication and upload data to the system platform through the communication between RS485 and concentrator ( PS: EM613002 - it’s NB concentrator which allows 25 pcs of RS485 DC meters).
Inquire Now
-
EM613001 200A 40-400V Din Rail Smart Shunt RS485 DC Power Monitoring EV Charger Smart Meter
The EM613001 din rail type DC energy meter is mainly designed for Telecom base stations, DC charging station, and solar PV applications etc. The dc meter can measure of important DC parameters: Voltage, current, power and energy etc. It also support bi-directional measurement. All data in the meter are accessible via RS485 using Modbus RTU/DLT645.
Inquire Now
-
D129072 Over Current Alarm 100A Outdoor M-bus Split Core Current Transformer Sensor for EV Charger
D129072 is a 200mA to 100A wireless M-bus smart current transformer which is the best choice of outdoor electricity measurement.
Inquire Now
-
IM-M1002 Anti-magnetic 500mT 80A 250VDC 12 Volt Single Pole Miniature Motor Latching Relay for EV
IM-M1002 is a motor holding relay with a switching current of 80A, with a compact design size of 26.5*23.5*15mm, contact arrangement 1A/1B, contact material AgSnO2
Inquire Now
-
IM-M1202 Solar Relays 40 Amp 100A Miniature Motorized Power Latch Relay
IM-M1202 is a latching relay with a maximum switching current of 100A, with a compact design size of 29*23.5*16mm, a contact method of 1A/B, and a permanent magnetic resistance of 500mT.
Inquire Now
-
IM-NE801A IEC62955 Withstand Voltage 4kV 32A 40A 250V 2A Contact PCB Mount EV AC Charger Relay
IM-NE801A is a continuous current 40A new energy power relay, the high dielectric strength is 4000VAC 1min under the condition of low temperature rise, and the sealed structure can withstand harsh environments.
Inquire Now
-
IM-NE801 Energy-saving 35A 40A DPST-NO PCB Double Pole High Power Solar Relay for PV Inverter
IM-NE801A has a 2 Form A (DPST-NO) contact arrangement in a PCB board mountable small case size. It features the 3mm contact gap and 4kV surge breakdown required by photovoltaic standard requirements.
Inquire Now