-
D129072 Over Current Alarm 100A Outdoor M-bus Split Core Current Transformer Sensor for EV Charger
D129072 is a 200mA to 100A wireless M-bus smart current transformer which is the best choice of outdoor electricity measurement.
Inquire Now
-
IM-M1002 Anti-magnetic 500mT 80A 250VDC 12 Volt Single Pole Miniature Motor Latching Relay for EV
IM-M1002 is a motor holding relay with a switching current of 80A, with a compact design size of 26.5*23.5*15mm, contact arrangement 1A/1B, contact material AgSnO2
Inquire Now
-
IM-M1202 Solar Relays 40 Amp 100A Miniature Motorized Power Latch Relay
IM-M1202 is a latching relay with a maximum switching current of 100A, with a compact design size of 29*23.5*16mm, a contact method of 1A/B, and a permanent magnetic resistance of 500mT.
Inquire Now
-
IM-NE801A IEC62955 Withstand Voltage 4kV 32A 40A 250V 2A Contact PCB Mount EV AC Charger Relay
IM-NE801A is a continuous current 40A new energy power relay, the high dielectric strength is 4000VAC 1min under the condition of low temperature rise, and the sealed structure can withstand harsh environments.
Inquire Now
-
IM-NE801 Energy-saving 35A 40A DPST-NO PCB Double Pole High Power Solar Relay for PV Inverter
IM-NE801A has a 2 Form A (DPST-NO) contact arrangement in a PCB board mountable small case size. It features the 3mm contact gap and 4kV surge breakdown required by photovoltaic standard requirements.
Inquire Now
-
IM901 TUV 63A 90A 250VAC 1A Double Coil 12VDC High Power AC Latching Solar PV Relay
As a type of magnetic relay, IM901 latching relay can stand out from many products because of its unique characteristics. It has the characteristics of shock resistance, safety and reliability, long life, low power consumption, strong load capacity, small size, and better performance.
Inquire Now
-
IM601 60A 250VAC Dual Coil 12VDC SPST NO High Power PCB Latching Relay for Level 2 Charger
Relays are used for safety cutoff purposes for the AC side power grid of a charging station. When an abnormal current is generated, it is important to securely cut the current so that it doesn't impact the charger or DC side power supply. IM601 60a relay is designed for ev charger.
Inquire Now
-
IM601 60A 250VAC 1A PCB Mount Single Coil 12VDC SPST NO Latching Power Relay for Solar Panels
IM601 is a small industrial bistable latching power relay with continuous current up to 60A, and switching 250VAC/6~48VDC. Single and twin coil latching used for solar and energy conservation. This photovoltaic relay is a single pole normally open latching PV relay.
Inquire Now
-
MD0630T01A Solar CT Sensor B Type Leakage Protection RCMU Residual Current Monitoring Unit for PV Inverter
The trend in PV string inverters for large solar power plants is towards higher power classes. This requires current sensors with a higher current capability. leakage current sensors are used in the RCMU in PV inverters. Leakage currents represent safety risks and thus impact the whole system.
Inquire Now
-
MD0630T01A IEC62955 EV 30mA AC 6mA DC Leakage Protection Built-in Type B RCD Residual Current Sensor
MD0630T01A is a residual current detection RCD sensor, When an electric shock or leakage fault occurs in the circuit, the secondary side of the transformer outputs a mA level current (DC 6mA, AC 30mA), so that the equipment on the connected secondary line will be protected (cut off the power supply, alarm signal, etc.)
Inquire Now